About CLAWGUARD

Find CLAWGUARD products at Clawguard.com or online at these fine retailers; Amazon, Chewy, Wayfair and Walmart. Find a list of local pet stores that carry CLAWGUARD at Clawguard.com.

Dogs and Cats cause damage to the home for various reasons. Dogs cause damage primarily due to anxiety or boredom. Cats cause damage because its instinctual! Find out more about these behaviors and how you can help your furry friend on our Blog page.

Yes! CLAWGUARD products can be purchased from around the world through Amazon and Clawguard.com

Feel free to share your ideas for new home protection products and we would be thrilled to explore bringing these products to life for you. Simply send an email to info@clawguard.com and we will get back to you asap.

CLAWGUARD Door Shields

No hardware is required! To prevent the door shield from swinging when in use, CLAWGUARD products come with a quality adhesive mounting fastener to use as needed when installing door shields throughout your home. See product instructions for more information.  

Easy to install, CLAWGUARD Door Shields act as a protective barrier to door and door frames, shielding the most commonly targeted areas by dog and cats. Simply hang your door shield on the door knob, attach optional adhesive fastener to prevent swinging (if needed) and your door and door frame is protected. CLAWGUARD door shields can be customized with household scissors for the perfect fit. 

CLAWGUARD Door Shields were designed to fit inside OR outside the door. For outside use, simply pop the Door Shield on the knob, bend slightly from the top then close the door. Once the door is closed, the Door Shield will nestle firmly into place, protecting the most commonly targeted area on the outside door and door frame!

The Original Door Shield measures 18" by 43" and fits standard doors, providing door, door frame and wall protection. The Heavy Duty Door Shield measures 20" by 44," and is 2x stronger, protects a larger coverage area.

CLAWGUARD Door Shields were tested, designed and patented with both a smooth and textured surface so pet owners can control when and if they want to hear scratching. When pets scratch the smooth side, the scratching sound is less audible. When pets scratch the textured side, the scratching sound is more audible - making a ZIP! ZIP! sound. Perfect for training! Some pets tend to dislike like the textured side and may eventually avoid the door shield altogether! 

Yes! Many cat owners said their cat did not like scratching the Door Shield and eventually avoided the door area altogether. Cat parents wanted more, so we created CLAWGUARD Protection Tape, CLAWGUARD Furniture Shields and CLAWGUARD Cat Training Tape to stop cats from damaging weather stripping, shredding furniture and jumping on counters. 

Simply remove your Door Shield from the door, wipe clean with a damp cloth and then easily reinstall. Your CLAWGUARD Door Shield will look fresh, clean and clear. It’s that simple. 

CLAWGUARD Mounting Tape Sticky Tabs are high quality fasteners with a strong removable adhesive. What that means is that our fasteners have a strong hold, but can be removed from your surface without damage. With that said, different paints and stains are made using different synthetics and may peel paint or stain when removed. Therefore, we recommend testing CLAWGUARD Mounting Tape in a safe and inconspicuous spot on the desired area and test for several days before applying more broader area. To remove, peel slowly or use a hair dryer to warm the adhesive for easy removal. Leaves no sticky residue.

CLAWGUARD Universal Scratch Shields

Install in seconds! Simply remove the blue or white protective peel-off film from BOTH sides of your Universal Scratch Shield. The Shield is Crystal Clear! Use the transparent CLAWGUARD Mounting fasteners provided to install without hardware!

CLAWGUARD Universal Scratch Shields can be customized for the perfect fit. Since our shields are made from high-quality PET, you will need to use a jig saw, table saw, router or scoring tool. Choose a blade that has many teeth. Always wear safety glasses to protect your eyes and always cut in a well-ventilated area.

Install in seconds! Simply remove the blue or white protective peel-off film from BOTH sides of your Universal Scratch Shield. Pick from a corner to begin peeling the liner off. The Shield is Crystal Clear! Use the transparent CLAWGUARD Mounting fasteners provided to install without hardware!

Walls and Doors are a common place where pet damage occurs. Unsightly scratch marks, chew marks, dry wall repair, lost deposits and door replacements can be expensive. CLAWGUARD UNIVERSAL SCRATCH SHIELD is 24” x 32”, crystal clear, high quality, tough, poly-shield barrier. Perfect for Screen Doors, Glass, Windows, Gates, Walls, Doors and more.

CLAWGUARD Universal Scratch Shields work great on transparent Glass surfaces and provides protection from the most persistent scratchers. Crystal clear in color, the scratch shield adheres to the glass with provided fasteners that leave no messy adhesives or sticky residue. And the best part, easily remove the Scratch Shield to wipe clean with a damp cloth and then easily reinstall in seconds.

Simply wipe clean with a damp cloth keeping it clean and clear. It’s that simple! 

CLAWGUARD Protection Tape

CLAWGUARD Protection Tape is clear single-sided adhesive film which provides durable protection against pets that scratch and damage window sills, furniture, weather stripping, screens, couches, glass and more! Tested against the sharpest sharp cat claws. Each order includes a 4 in x 10 ft roll.

Although it is not recommended for certain leather conditions (see product caution statement), it is impossible to know how CLAWGUARD Protection Tape will perform because of the various leather synthetics available in the market. Therefore, if you choose to test on leather, apply to clean smooth surface and test in small inconspicuous area for 2 weeks before broad application.

Because paints and stains are made from various synthetics, it is impossible to know how CLAWGUARD Protection Tape will perform with your particular surface. Most customers report no problems, however if you choose to use on a painted or stained surface, first test the area by applying the Protection Tape to a clean smooth surface and test in small inconspicuous area for 2 weeks before broad application. If needed, use a hair dryer to warm the adhesive to remove clean without leaving residue.

No! CLAWGUARD Protection Tape removes clean, leaving no sticky residue behind. In some cases, CLAWGUARD Protection Tape has been reported to remove painted or stained surfaces due to the variance of synthetics used to make the paint or stain. If needed, use a hair dryer to warm the adhesive to remove clean.

No! Use as directed. Not recommended for old, fragile or antique leather couches that have withered, chipped, frayed or damaged leather as the adhesion may remove grade.

CLAWGUARD Furniture Shields

Simply cover the targeted area with your CLAWGUARD Furniture Shield. Use the included clear upholstery twist pins to firmly lock the protective barrier in place - no shifting or fuss! Find the pre-cut hole and easily twist the pin to lock securely into fabric. To remove, simply counter twist to remove. Pins are reusable. Do not use pins in leather.

No! Although the provided upholstery twist pins will not leave marks on fabric furniture, the pins will puncture leather. Therefore, using the upholstery twist pins are not recommended for use on leather furniture.

Simply remove your Furniture Shield from its place, wipe clean with a damp cloth and then easily reinstall. Your CLAWGUARD Furniture Shield will look fresh, clean and clear. It’s that simple. 

CLAWGUARD Cat Training Tape

No! Our high-quality medical grade CLAWGUARD Cat Training Tape was designed to install and remove from any surface without a sticky mess. The Training Tape removes clean, leaving no sticky residue behind. If needed, warm with a hair dryer to easily remove the adhesive.

Simply peel off by hand or use a hair dryer to warm the adhesive for easy removal. CLAWGUARD Cat Training Tape is made with medical grade adhesive and is safe for both furniture and cats when used as directed.

To keep your Cats safe and your Training Tape fresh and performing great, its recommended to change your Cat Training Tape once a week.

CLAWGUARD Window Sill Protectors

Use a tape measure to determine the size Window Sill Protector you need. Measure the length of your window sill that runs parallel to your window. This will give you the width needed. To determine the depth needed, measure from the window to the edge of your window frame. Each CLAWGUARD Window Sill Protector has a waterfall drop of 1" that protects the edge of your window sill.

Install in seconds! Simply remove the blue or white protective peel-off liner film from BOTH sides of your Window Sill Protector. Pick from a corner to begin peeling the liner off. The Window Sill Protector is Crystal Clear! Use the CLAWGUARD Mounting Tape Sticky Tabs provided to install. No hardware needed!

Yes! To trim your Window Sill Protector, use a tool that contains a fine tooth blade, like a scoring knife or jigsaw. CLAWGUARD products are made of high-quality PETG and designed to be customized as needed. Google search, "how to cut a PETG sheet" to find out if you have a common tool that will work for you!

CLAWGUARD Mounting Adhesive Tape

CLAWGUARD Mounting Tape is a double-sided sticky tape that is designed to hold various CLAWGUARD protection shields in place. No Hardware needed! Remove the clear liner from both sides of the tape and apply it to the shield - then press the shield into place on your desired surface.

To remove CLAWGUARD Mounting Tape from surfaces, gently start at one corner and peel away. You can also warm the adhesive with a hair dryer to easily remove the adhesive without leaving any sticky residue.

Because paints and stains are made from various synthetics, it is impossible to know how CLAWGUARD Mounting Tape will perform with your particular surface. Most customers report no problems, however if you choose to use on a painted or stained surface, first test the area by applying the Mounting Tape to a inconspicuous clean surface before applying more broadly. If needed, use a hair dryer to warm the adhesive to remove clean without leaving residue.

Simply pick at a corner to release the liner, then peel away. Both sides of the stick tabs have a liner that need to be removed before applying to the shield and surface.